Skip to content

Streamdeck sample

Using the StreamDeck rainbow sample bundle

The streamdeck-rainbow bundle paints your streamdeck with different colours. It is located in samples/streamdeck-rainbow.

Sadly you can't access the StreamDeck while another application accesses it. So you need to stop your StreamDeck Software before.

Prerequisites

You will need a working nodecg-io installation. If you have non yet take a look at installation guide. You may need to install this bundle, so take a look at the “Try an included sample”-Guide. It will also tell you how to log in and how to use the GUI.

You also need: (If you're on Linux)

Follow the instructions listed under Manual Installation here. Everything after the sudo udevadm command can be omitted.

Configure the StreamDeck Rainbow bundle

  1. In NodeCG, create a new StreamDeck service instance.

  2. Enter the configuration:

    {
        "device": "default"
    }
    

    Info

    default tells the bundle to automatically find a StreamDeck. If you use multiple StreamDecks, you need to put in an ID here.

  3. Set the sample's (streamdeck-rainbow) dependency to be the newly created service instance (of type streamdeck).

  4. Watch your streamdeck.